当我们用yum install kernel-devel安装的时候，他因为yum库里面用的都是最新的源代码。而当前机器的内核却比yum库的老。所以会不成功。

正确操作应该是这样的

 

yum install kernel 单独的命令先。不可以和其他的一起安装。

安装完新内核后，重启一次。并以新内核加载后再执行后面的命令就一定会成功了。

用uname -a看看是不是新内核然后执行下面

yum install gcc gcc-c++ kernel* libcX* xinetd inetd

http://download3.vmware.com/software/vmserver/VMware-server-1.0.10-203137.i386.rpm

即可了。

接着运行/usr/bin/vmware-config.pl

记得输入linux版的序列号92RDD-YP623-28Q0N-4T6V5

照提示安装完成.即可，使用的端口号是904或902.远程连接时需用ip:904方式连接。

然后再安装mui管理器。

http://download3.vmware.com/software/vmserver/VMware-mui-1.0.10-203137.tar.gz

tar xvzf VMware-mui-1.0.10-203137.tar.gz

cd VMtab键

vmware-mui-install.pl

照提示做即可最后用https://ip:8333或http://ip:8222访问进行管理或下载

http://download3.vmware.com/software/vmserver/VMware-server-win32-client-1.0.10-203137.zip

进行904端口管理.

然后

cd /usr/local/directadmin/scripts
chmod 777 install.sh
chmod 777 setup.sh
./install.sh
后就开始安装了。如果不行，就把压缩包里面的install.sh,setup.sh文件复盖进去再次运行
chmod 777 install.sh
chmod 777 setup.sh
./install.sh
这三行。如果中间还报错就加上
dos2unix install.sh
dos2unix setup.sh

因为这些文件是我在win7里面编辑破解的。换行类型变掉了。用上面的命令处理一下就可以了。

成功开始后会编译大堆文件。大约需要两个小时的编译。慢慢等吧。

全部完成后

vi /usr/local/directadmin/conf/directadmin.conf中找到
ethernet_dev=eth0
后面的eth0不一定是eth0，有可能是其他的。反正改成不是你当前外网IP用的那块网卡就行.这里假定改成eth0：0。这个eth0:0要记住。后面破解还会用到.
下面开始配置网卡IP
要先看看原来的网卡什么配置
cd /etc/sysconfig/network-scripts
cat ifcfg-eth0
这里面的eth0要换成前面提到的.
记下他的HWADDR下面会用到
vi ifcfg-eth0:0
粘贴下面的内容

# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
BOOTPROTO=none
NAME=""
HOTPLUG=no
MACADDR=""
HWADDR=这个换成你前面看到的HWADDR
DEVICE=eth0:1
NETMASK=255.255.255.0
MTU=""
BROADCAST=255.255.255.255
IPADDR=117.79.82.5
NETWORK=117.79.82.0
ONBOOT=yes

哆啦A梦30周年全集(短篇,中篇,大长篇)

<?php

 

function outmail($email_to, $email_subject, $email_message, $email_from = '') {

 

//下面的配置参数请依实际情况注释掉，选用其他段.

//调用示例

//发给一个人outmail('user1 <test1@test1.com>','标题','邮件正文');

//发给一群人outmail('user1 <test1@test1.com>, user2 <test2@test2.net>','标题','邮件正文');

 

    /* linux独有,使用sendmail发送

      $mail['mailsend'] = 1;

      $mail['charset']='utf-8';//发送邮件编码

      $mail['maildelimiter'] = 1;//1使用 \r\n 作为分隔符,2使用 \r 作为分隔符,3使用\n分隔

      $mail['mailusername'] = 1;//是否收件人包含用户名

      $mail['mailprefix'] = "巧维科技";//邮件标题前缀,如填test则邮件标题显示为 [test]我是邮件标题.

      $mail['from']="";//默认发件人,只是用于自动填充发件人.实际调用函数时可以被参数替代.

      $mail['mailreplyto']="";//默认回复邮件地址，并不是所有的邮件提供商都支持，有时候填了也会自动回复到发件人那里.

     */

 

    /*   windows独有,使用windows的smtp发送,windows必须先安装iis,在安装iis时勾上smtp组件.

      $mail['mailsend'] = 3;

      $mail['charset']='utf-8';//发送邮件编码

      $mail['maildelimiter'] = 1;//1使用 \r\n 作为分隔符,2使用 \r 作为分隔符,3使用\n分隔

      $mail['mailusername'] = 1;//是否收件人包含用户名

      $mail['mailprefix'] = "系统邮件请勿回复";//邮件标题前缀,如填test则邮件标题显示为 [test]我是邮件标题.

      $mail['from']="";//默认发件人,只是用于自动填充发件人.实际调用函数时可以被参数替代.

      $mail['mailreplyto']="";//默认回复邮件地址，并不是所有的邮件提供商都支持，有时候填了也会自动回复到发件人那里.

      $mail['server'] = 'localhost';

      $mail['port'] = '25';

     */

 

    /* linux,windows通用.gmail邮件需要openssl扩展支持. */

    $mail['mailsend'] = 2;

    $mail['charset'] = 'utf-8'; //发送邮件编码

    $mail['maildelimiter'] = 1; //1使用 \r\n 作为分隔符,2使用 \r 作为分隔符,3使用\n分隔

    $mail['mailusername'] = 1; //是否收件人包含用户名

    $mail['mailprefix'] = "巧维科技"; //邮件标题前缀,如填test则邮件标题显示为 [test]我是邮件标题.

    $mail['from'] = ""; //默认发件人,只是用于自动填充发件人.实际调用函数时可以被参数替代.

    $mail['mailreplyto'] = ""; //默认回复邮件地址，并不是所有的邮件提供商都支持，有时候填了也会自动回复到发件人那里.

    $mail['server'] = 'smtp.gmail.com'; //smtp服务器一般是smtp加域名。如qq的,smtp.qq.com,gmail的smtp.gmail.com

    $mail['port'] = 465; //smtp的端口号一般是465或25

    $mail['auth'] = 1; //是否需要登录.基本上用网上的邮局如qq,163,sina,99%这个得填1,只有一种情况你自己在windows建邮件服务器可以填0

    $mail['from'] = '系统管理员 username@gmail.com'; //发件人,通常和邮箱登录用户名是一样的

    $mail['auth_username'] = 'username@gmail.com'; //邮箱登录用户名,是一个完整的邮件地址.如a@a.com

    $mail['auth_password'] = 'flksadjfs'; //邮箱登录密码

    $mail['ssl'] = 1; //是否需要ssl验证,gmail的验证需要打开这个选项

    /*配置结束*/

 

    $mailreplyto = isset($mail['mailreplyto']) ? $mail['mailreplyto'] : $mail['from'];

    $maildelimiter = $mail['maildelimiter'] == 1 ? "\r\n" : ($mail['maildelimiter'] == 2 ? "\r" : "\n");

    $mailusername = isset($mail['mailusername']) ? $mail['mailusername'] : 1;

 

    $email_subject = '=?' . $mail['charset'] . '?B?' . base64_encode(str_replace("\r", '', str_replace("\n", '', '[' . $mail['mailprefix'] . '] ' . $email_subject))) . '?=';

    $email_message = chunk_split(base64_encode(str_replace("\r\n.", " \r\n..", str_replace("\n", "\r\n", str_replace("\r", "\n", str_replace("\r\n", "\n", str_replace("\n\r", "\r", $email_message)))))));

 

    $email_from = $email_from == '' ? '=?' . $mail['charset'] . '?B?' . base64_encode($mail['mailprefix']) . "?= <$adminemail>" : (preg_match('/^(.+?) \<(.+?)\>$/', $email_from, $from) ? '=?' . $charset . '?B?' . base64_encode($from[1]) . "?= <$from[2]>" : $email_from);

 

    foreach (explode(',', $email_to) as $touser) {

        $tousers[] = preg_match('/^(.+?) \<(.+?)\>$/', $touser, $to) ? ($mailusername ? '=?' . $mail['charset'] . '?B?' . base64_encode($to[1]) . "?= <$to[2]>" : $to[2]) : $touser;

    }

    $email_to = implode(',', $tousers);

//构造邮件头.

//邮件头示例

    /*

      Received: from mail.360buy.com (unknown [211.151.32.10])

      by newmx77.qq.com (NewMx) with SMTP id

      for <xx@qq.com>; Tue, 17 May 2011 22:13:50 +0800

      X-QQ-SSF:00500000000000F00x000001000000

      X-QQ-mid:mx77t1305641631t84t13212

      Received: from web162 (192.168.10.254) by cas.360buy.com (192.168.80.152) with

      Microsoft SMTP Server id 8.1.240.5; Tue, 17 May 2011 22:14:11 +0800

      Subject: =?GB2312?Q?=CD=FC=BC=C7=C3=DC=C2=EB=CC=E1=CA=BE?=

      Sender: =?GB2312?Q?=BE=A9=B6=AB=CD=F8=C9=CF=C9=CC=B3=C7?=

      <customer_service@360buy.com>

      From: =?GB2312?Q?=BE=A9=B6=AB=CD=F8=C9=CF=C9=CC=B3=C7?=

      <customer_service@360buy.com>

      Date: Tue, 17 May 2011 22:12:36 +0800

      To: "=?GB2312?Q?xx@qq=2Ecom?=" <xx@qq.com>

      X-Priority: 3

      X-MSMail-Priority: Normal

      Content-Transfer-Encoding: Quoted-Printable

      MIME-Version: 1.0

      X-Mailer: JMail 4.4 by Dimac

      Content-Type: text/html

      Message-ID: <14eebe19-3bcb-458a-b25a-94acd11e029b@cas.360buy.com>

      Return-Path: customer_service@360buy.com

     */

    $headers = "From: $email_from{$maildelimiter}X-Priority: 3{$maildelimiter}X-Mailer: Reynaldliu{$maildelimiter}Return-Path: {$mailreplyto}{$maildelimiter}MIME-Version: 1.0{$maildelimiter}Content-type: text/plain; charset=" . $mail['charset'] . "{$maildelimiter}Content-Transfer-Encoding: base64{$maildelimiter}";

 

    $mail['port'] = $mail['port'] ? $mail['port'] : 25;

 

    if ($mail['mailsend'] == 1 && function_exists('mail')) {

//仅linux或unix或macos独有,不支持windows

        @mail($email_to, $email_subject, $email_message, $headers);

    } elseif ($mail['mailsend'] == 2) {

//使用smtp方式.如果有ssl需要打开php_openssl的扩展支持,windows,linux,macos系统通用.

        if ($mail['ssl'] == 1) {

            if (!$fp = fsockopen('ssl://' . $mail['server'], $mail['port'], $errno, $errstr, 30)) {

                $errorlog.="($mail[server]:$mail[port]) CONNECT - Unable to connect to the SMTP server";

            }

        } else {

            if (!$fp = fsockopen($mail['server'], $mail['port'], $errno, $errstr, 30)) {

                $errorlog.="($mail[server]:$mail[port]) CONNECT - Unable to connect to the SMTP server";

            }

        }

        stream_set_blocking($fp, true);

 

        $lastmessage = fgets($fp, 512);

        if (substr($lastmessage, 0, 3) != '220') {

            $errorlog.="$mail[server]:$mail[port] CONNECT - $lastmessage";

        }

 

        fputs($fp, ($mail['auth'] ? 'EHLO' : 'HELO') . " discuz\r\n");

        $lastmessage = fgets($fp, 512);

        if (substr($lastmessage, 0, 3) != 220 && substr($lastmessage, 0, 3) != 250) {

            $errorlog.="($mail[server]:$mail[port]) HELO/EHLO - $lastmessage";

        }

 

        while (1) {

            if (substr($lastmessage, 3, 1) != '-' || empty($lastmessage)) {

                break;

            }

            $lastmessage = fgets($fp, 512);

        }

 

        if ($mail['auth']) {

            fputs($fp, "AUTH LOGIN\r\n");

            $lastmessage = fgets($fp, 512);

            if (substr($lastmessage, 0, 3) != 334) {

                $errorlog.="($mail[server]:$mail[port]) AUTH LOGIN - $lastmessage";

            }

 

            fputs($fp, base64_encode($mail['auth_username']) . "\r\n");

            $lastmessage = fgets($fp, 512);

            if (substr($lastmessage, 0, 3) != 334) {

                $errorlog.="($mail[server]:$mail[port]) USERNAME - $lastmessage";

            }

 

            fputs($fp, base64_encode($mail['auth_password']) . "\r\n");

            $lastmessage = fgets($fp, 512);

            if (substr($lastmessage, 0, 3) != 235) {

                $errorlog.="($mail[server]:$mail[port]) PASSWORD - $lastmessage";

            }

 

            $email_from = $mail['from'];

        }

 

        fputs($fp, "MAIL FROM: <" . preg_replace("/.*\<(.+?)\>.*/", "\\1", $email_from) . ">\r\n");

        $lastmessage = fgets($fp, 512);

        if (substr($lastmessage, 0, 3) != 250) {

            fputs($fp, "MAIL FROM: <" . preg_replace("/.*\<(.+?)\>.*/", "\\1", $email_from) . ">\r\n");

            $lastmessage = fgets($fp, 512);

            if (substr($lastmessage, 0, 3) != 250) {

                $errorlog.="($mail[server]:$mail[port]) MAIL FROM - $lastmessage";

            }

        }

 

        $email_tos = array();

        foreach (explode(',', $email_to) as $touser) {

            $touser = trim($touser);

            if ($touser) {

                fputs($fp, "RCPT TO: <" . preg_replace("/.*\<(.+?)\>.*/", "\\1", $touser) . ">\r\n");

                $lastmessage = fgets($fp, 512);

                if (substr($lastmessage, 0, 3) != 250) {

                    fputs($fp, "RCPT TO: <" . preg_replace("/.*\<(.+?)\>.*/", "\\1", $touser) . ">\r\n");

                    $lastmessage = fgets($fp, 512);

                    $errorlog.= "($mail[server]:$mail[port]) RCPT TO - $lastmessage";

                }

            }

        }

 

        fputs($fp, "DATA\r\n");

        $lastmessage = fgets($fp, 512);

        if (substr($lastmessage, 0, 3) != 354) {

            $errorlog.= "($mail[server]:$mail[port]) DATA - $lastmessage";

        }

 

        $headers .= 'Message-ID: <' . gmdate('YmdHs') . '.' . substr(md5($email_message . microtime()), 0, 6) . rand(100000, 999999) . '@' . $_SERVER['HTTP_HOST'] . ">{$maildelimiter}";

 

        fputs($fp, "Date: " . gmdate('r') . "\r\n");

        fputs($fp, "To: " . $email_to . "\r\n");

        fputs($fp, "Subject: " . $email_subject . "\r\n");

        fputs($fp, $headers . "\r\n");

        fputs($fp, "\r\n\r\n");

        fputs($fp, "$email_message\r\n.\r\n");

        $lastmessage = fgets($fp, 512);

        if (substr($lastmessage, 0, 3) != 250) {

            $errorlog.="($mail[server]:$mail[port]) END - $lastmessage";

        }

 

        fputs($fp, "QUIT\r\n");

    } elseif ($mail['mailsend'] == 3) {

//windows独有发送

        ini_set('SMTP', $mail['server']);

        ini_set('smtp_port', $mail['port']);

        ini_set('sendmail_from', $email_from);

        @mail($email_to, $email_subject, $email_message, $headers);

    }

}

 

?>